Subscribe to our newsletter - Tech support

Temperature data logger up to 220°C with probe of various lenghts

S-Micro XL is a temperature data logger from -40°C to 220°C (standard calibration from 25°C to 140°C, calibrable from 0°C to 220°C, only the probe will resist above 140°C) with 20 or 50 or 100 or 150 mm or on demand length external probe (probes cannot be switched) on a 5 mm base (base height is not counted for probe length), managed with Windows software and USB reading bay: DiskInterface HS, Multibay. Battery is user replaceable and the data logger is provided with an Accredia (NIST equivalent) traceable cetificate on 6 points.

It is supported by the TS Manager software for validation compatible with the FDA 21 CFR Part 11 and GAMP 5 regulations.

Note: if used below -30°C, battery life will be highly reduced. When device is calibrated above 140°C accuracy and resolution might be less than what declared.


DiskInterface HS, DiskInterface HS Mini - USB drivers Windows XP / Vista / 7
DiskInterface HS, DiskInterface HS Mini - USB drivers Windows 8 / 10
Multibay - USB drivers Windows Xp / Vista / 7
Multibay - USB drivers Windows 8 / 10
DiskInterface (old model) - USB driver Windows XP / Vista / 7 / 8 / 10



Main features

  • With different lengths rigid probe for penetration
  • Completely food grade and waterproof
  • All software calculate lethality value (F0, PU, A0 ecc.)
  • Low battery consumption for an extended battery life
  • User replaceable battery (software shows battery status)
  • Very easy to deploy in any type of package
  • Accredia (NIST equivalent) traceable calibration certificate included
  • Available extended calibration from -40°C to 220°C (order extra calibration points; in case of wide calibration range the accuracy might be worse)
  • For calibration over 140°C minimum probe length 140 mm
  • Heat protections available for use above 140°C


  • Extremely high accuracy and precision: with an accuracy of ± 0,1°C these devices can be employed in any application involving food, pharmaceuticals, validation, laboratory and medical field
  • Fast response time thanks to the 3 mm diameter probe
  • Printed reports compliant with health regulations and ISO (data are not editable in the software)
  • Thanks to its reduced diameter it can be easily used in the narrow pasteurisation tunnels, especially for fresh filled pasta

The system

The system is made up by:

  • S-Micro XL temperature data logger
  • DiskInterface HS or Universal Multibay
  • SPD software or TS Manager software (compatible with the FDA 21 CFR Part 11 regulation)
Dimensions 64 h X 17 Ø (mm)
Probe dimensions Probe base dimensions 3 h X 14 Ø (mm) - Probe 20/50/100/150/on demand l X 3 Ø (mm) (l on demand: min. 12 mm / max. 175 mm. For longer probes ask for quotation)
Weight 57 g
Materials Stainless steel AISI316L, PEEK
Temperature range -40°C ÷ +140°C
Sensor temperature range -40 °C ÷ +220 °C
Standard calibration points (temperature) 25/50/75/100/121/140°C
Extra calibration points (temperature) Within the range -40 °C ÷ +220 °C
Extra calibration points (temperature) Up to 220°C (using the heat protections)
Temperature resolution 0,01 °C
Temperature accuracy ± 0,1 °C (within the calibration range)
Acquisition step From 1 every second up, with 1 second steps
Protection degree IP68
Battery type 3.0V lithium user replaceable
Battery life +17.000.000 acquisitions at 1 second step continuously (calculated time @25°C. Battery life may be shorter if used in low temperatures)
Accessories DiskInterface HS, Multibay universale



You may also be interested in...